The J5C91v2 RC Fishing Surfer Transmitter is custom built for boat and includes GPS and remote release functions for the Fishing Surfer when paired with the Boat Receiver.
This is a 2.4 gHZ radio system and must be paired with the J5C91Rv2 Receiver & GPS Combo Set for proper functionality
This system can be used with Version 1,2, 3 boats and electronics!
You will need to Calibrate, Instructions Below:
1.) Turn off the Transmitter and Unplug the Boat.
2.) Press (and hold down) "ST/R" Button and "GPS ON" Buttons at the Same Time.
3.) While Holding "ST/R" Button and "GPS ON" Buttons Turn on Transmitter, (Do Not Plug in the Boat). Confirm "GPS ON" and "GPS Return" Lights are On.
Keep Holding 5 Seconds and Release Buttons, Then Turn Off Transmitter and Unplug the Boat.
3.) Turn off the Transmitter and Unplug the Boat.
4.) Press (and hold down) "ST/R" Button.
5.) While Holding "ST/R" Button Turn on Transmitter, (Do Not Plug in the Boat). Confirm "GPS" Light is on, Wait 5 Seconds and Release Button and Turn Off Transmitter.
6.) Turn off the Transmitter and Unplug the Boat.
7.) Press (and hold down) "ST/L" Button.
8.) While Holding "ST/L" Button Turn on Transmitter. Confirm "GPS ON" Light is Flashing.
Release Button, (do not turn off) and Plug in Boat.
9.) Transmitter Off/Boat Unplugged.
10.) Hold Transmitter Trigger Down, Turn on Transmitter.
11.) While Holding Trigger Down Plug in The Boat Battery.
12.) Boat will Make Beep-Beeps Listen for 8 Beep-Beeps and Let Go Trigger.
Boat Should make 1 Beep-Beep when Done.
